CALC 1 General Chain Mode Calculator
This is a general calculator that features a K (Constant) key for repetitive operations.
See the Calculations Using the Chain (CHN) Calculation Mode
K Example of Storing "+2" as a constant
| To | Press | Display |
|---|---|---|
| Enter a formula | 5+2 | 5.00+2 |
| Store the operator and right hand value and evaluate the formula. Note that the "K" flag will appear at the top right of the display. | K | 7.00 |
| Add 2 to 6 | 6 = | 8.00 |
| Add 2 to 7 | 7= | 9.00 |
With CALC 1 there is no need to tap "=" after pressing the "K" key.
A
"K" flag is displayed in the upper right part of the display when the "K Mode" is active.
The CALC 1 History records the full formula.
Valid operators are +, -, ×, ÷, with or without % and ^.
The K mode is active until another operator is entered. The "K" flag will no longer appear.
Note that the K mode only works with the Chain (CHN) Calculation Mode
K Example of Storing "+5%" as a constant
| To | Press | Display |
|---|---|---|
| Enter a formula | 10+5% | 10.00+.050 |
| Store the operator and right hand value and evaluate the formula. Note that the "K" flag will appear at the top right of the display. | K | 10.50 |
| Add 5% to 6 | 6 = | 6.30 |
| Add 5% to 25 | 25= | 26.25 |
The History will display the following for "Add 5% to 25":
Formula:
25+5.00%
Result = 26.25
Also see
Storing and Recalling Numbers.